lt665r NOW AVAILABLE: highly sensitive 6 mp ccd usb3.0 camera
The Lt665R is Lumenera’s latest high-performance 6MP USB 3.0 CCD camera that draws the most from the industry leading Sony EXview HAD II sensor technology. The ICX694 sensor-based Lt665R reliably delivers full resolution frames at the maximum achievable speed of 27 fps at full resolution over the 5 Gbps USB 3.0 data interface. This camera is ideal for applications where high speed, sensitivity and resolution are critical.
The camera includes 128 MB of onboard memory for frame buffering, which ensures dependable and reliable image delivery even in the most demanding environments. The Lt665R can be customized to suit OEM designs.
For further information and details, click here.
lt965R coming soon: 9.1 MP Sony ICX814 EXview HAD II CCD USB 3.0 Camera
19 fps | USB 3.0 Interface | High Resolution | Low noise
The ICX814 sensor-based Lt965R reliably delivers full resolution frames at the maximum achievable speed of 19 fps. Lumenera is one of a limited number of camera suppliers to provide the highest possible frame rate that can be achieved with the ICX814 sensor. The camera includes 128 MB of onboard memory for frame buffering, which ensures dependable and reliable image delivery even in the most demanding environments.
Product Highlights Include:
- 19 fps at full resolution (3376 × 2704)
- High dynamic range and high sensitivity
- Low dark current and read noise
- High saturation signal level
- Global shutter with progressive scan for low smear
- 1” optical format
- Excellent anti-blooming characteristics
This camera is ideal for applications where high resolution and sensitivity are required such as high-resolution surveillance, traffic, tolling, high-speed inspection, machine vision and NIR applications.
Contact a Lumenera sales representative for more details.
In The News
LUMENERA TECHNOLOGY PROFILE IN “TRAFFIC TECHNOLOGY INTERNATIONAL”
Lumenera was recently featured in "High-performance traffic imaging
for the next generation", an article that discusses the use of USB 3.0 technology in ITS applications.
Below is a excerpt from this interesting article:
Before USB 3.0, if you required a camera that could output higher resolution and higher frame rates than GigE could
support, you needed an interface such as CameraLink (medium or full modes), which were more costly and complex,
had limited cable length and required a frame grabber card. The requirement for a frame grabber can become
a major obstacle for compact embedded platforms, such as
those found in transportation.
In 2011, Lumenera recognized that USB 3.0 would change the landscape of camera interfaces by enabling higher resolutions and frame rates without requiring frame grabbers. USB 3.0, like USB 2.0, is a plug-and-play interface,
which has grown in popularity and now has strong support on the host side with many hardware platforms and
mature drivers. This makes USB 3.0 an ideal solution for applications requiring more than can be offered by GigE
and dual GigE interfaces.
To read the full article please click here.
lumenera featured in intertraffic magazine
Lumenera's Lt365R USB 3.0 CCD camera was featured in the special edition of Intertraffic, that covered highlights from the International Intertraffic 2014 Show, held in Amsterdam last March. Below is an excerpt from the article:
The Lt365R boasts a 2.8 MP progressive-scan sensor and a global shutter, for high-speed image capture without blur. The Sony ICX674 sensor combines speed, sensitivity and low noise and the 'R' designation identifies that these products have been engineered to meet the demands of many applications by significantly reducing the read and dark current noise.
This provides imaging in difficult lighting conditions, or even into the NIR range, says Dany Longval, Vice President, Worldwide Sales. "We’re pushing the sensor to the limit here. Everyone can produce good images in daylight. The challenge is to do it at night. The new Lt365R produces high-resolution pictures with low noise, and the USB 3.0 connectivity runs at 5GB/s, making the camera ideal for applications such as tolling and parking.
LUMENERA’s EVENT LISTINGS
LUMENERA AT THE AIA VISION SHOW: Lumenera exhibited at the AIA Vision Show in Boston, where we presented the Lt665R and Lt365R, high-performance USB 3.0 CCD cameras based on Sony's EXview HAD II technology. Below is a link to a short video that talks about these cameras, and the exciting new products Lumenera is set to release in 2014:
Click here to watch the video
ASSOCIATION FOR UNMANNED VEHICLE SYSTEMS INTERNATIONAL (AUVSI 2014): Lumenera recently exhibited at AUVSI, one of the largest exhibitions in the world that showcases the most comprehensive collection of unmanned systems for every domain (air, ground and maritime). The show was held over three days in the middle of June in Orlando.
Lumenera provided a hands on demo of the newly released Lt665R, just one of the many cameras in our portfolio that offer an advanced imaging solution for a variety of Unmanned Systems. Also featured was the Lg11059, Lumenera's 11 megapixel camera that offers exceptionally high resolution and sensitivity.
Lt Camera Series - Lumenera’s highly innovative USB 3.0 family of cameras each offer distinct benefits depending on your application needs. Choose from the proven CMOSIS CMV2000 (Lt225) and CMV4000 (Lt425) Rev3 sensors offering low noise and high sensitivity, or the fastest USB 3.0 cameras on the market based on the Sony ICX674 CCD sensor (Lt365R) and the Sony ICX694 CCD sensor (Lt665R).
Lg11059 - Lumenera's 11 megapixel camera providing exceptionally high resolution and sensitivity. Features include the Kodak KAI-11002 CCD sensor, 4008 x 2672 resolution, large dynamic range up to 66 dB and selectable 8 or 14-bit data output.
November 04-06, 2014
For a full list of upcoming events, please click here.
fEATURED JOB OPPORTUNITIES
Business Development Director - Scientific OEM Europe (UK):
We are seeking a highly motivated individual for the role of Business Development Director – Scientific OEM, to help grow our OEM business within Europe. The scientific camera market is a growing segment using advanced vision technology to implement life sciences instruments, medical imaging, physics, material research, ophthalmology, pathology and other advanced applications. Significant experience in sales is required, as is knowledge of the camera marketplaces which we serve.
You’ll spend the majority of your time dedicated to outbound hunting via telephone, email, trade show, and customer site visits to develop new opportunities, and a smaller portion of your time qualifying and converting new business from inbound leads. We have high expectations but offer room for personal and professional growth within our fast paced company.
To read more, or apply for this opportunity click here.