Lu100

1.3 Megapixel OEM USB 2.0 Camera Module

Lumenera’s Lu100 series of board level megapixel cameras is designed for use in a wide variety of industrial and scientific OEM applications.

With 1280 x 1024 resolution and on-board processing these cameras deliver outstanding image quality and value. Uncompressed images in live streaming video and still image capture are provided across a USB 2.0 digital interface. Advanced camera control is available through a complete SDK, with sample code available to quickly integrate camera functions.

Hardware and software based synchronization trigger is provided standard. Monochrome product models are available, as well asenclosed (Lu105) and custom form factors.

Product Highlights

  • Monochrome, progressive scan, 1.3 megapixel sensor
  • 15 fps at full 1280x1024 resolution, 30 fps at 640x480 (sub-sampled)
  • Higher frame rate in sub-sampled mode
  • Full sub-window control
  • Auto white balance and auto exposure

Ordering Options

Technical Specifications

Camera Specifications

Image Sensor Omnivision OV9121, CMOS, 1/2” format, mono, 6.6 x 5.3 mm array
Effective Pixels 1280 x 1024, 5.2μm square pixels
Frame Rate 15 fps at 1280x1024, 30 fps at 640x480 (sub-sampled)
Dynamic Range 60 dB
Sensitivity 1.0 V/Lux-sec
Auto Exposure Automatic / Manual
White Balance Automatic / Manual
Dimensions 2.00 x 2.50 x 1.63 inch (board level) 2.25 x 3.85 x 1.56 inch (enclosed)
Mass ~150g / 300g
Power Requirement USB bus power, or external 6 V DC, 500 mA
Power Consumption ~2.5 Watts
Operating Temperature 0 to 50°C
Operating Humidity 0 to 95%, Non-condensing
Interface Connector Standard USB cable
Lens Mount C-Mount (CS-Mount option)