INFINITY ANALYZE Software – Sizing the Preview Resolution

1) Fit to Window

The size of the preview window may be altered by selecting the Fit to Window icon in the View dropdown menu shown in Figure 1. Once this has been activated the preview window size may be changed by grabbing a corner of the window and dragging it. If the window is maximized the Minimize/Restore icon located in the upper right hand side of the screen will resize the window allowing it to be reshaped.

As the window size decreases from full resolution to a smaller size, the frame rates for CMOS sensors will increase*. The frame rate readout in frames per second (fps) may be found on the bottom right hand side of the software shown in Figure 2.

*Please note: Frame rates are dependent on exposure times. A higher exposure rate may limit the maximum frame rate produced by the camera. For example, the maximum frame rate for a camera with an exposure of 200 ms is 5 fps

2) Image Window Size

The image preview window may also be sized by selecting the Image Window Size selection under the View drop down menu shown in Figure 3. This can only be accessed while in the Fit to Window mode. Image Window Size will be grayed out if the preview window is maximized. To activate, click the Minimize/Restore icon. Once the Image Window Size option is selected a dialog box appears (Figure 4). You may now select your preview resolution.

Return to newsletter